Get A Transmission Quote
Ship Direct To Repair Shop
We provide an out-the-door price, with shipping, for a replacement remanufactured CH465 / SM465 transmission direct to the repair shop.
CH465 / SM465 Transmissions At Wholesale Prices
At Street Smart, we provide remanufactured transmissions shipped factory direct at wholesale prices to save you money.
Our Remanufactured CH465 / SM465 Transmission Upgrades & Upgrades
Put simply, a remanufactured transmission is a used transmission that has been returned to a like-new condition. Each remanufactured CH465 / SM465 is built in our state of the art factory by skilled Certified technicians. They test everything from metal thickness to spring tension before the process begins. And every “hard part” that doesn’t measure up to the manufacturer’s original specifications, gets replaced. By the time it’s finished, a reman transmission should perform exactly like a new one. Now let’s take a closer look at what sets a Street Smart Transmission apart from the rest:
All Gears & Shafts Meet OEM Specifications
All of the gears and the main shaft inside each remanufactured CH465 / SM465 that we produce, is carefully inspected for cracks and tested for straightness. Any hard part that shows signs of wear or damage is immediately replaced.
Upgraded Seals & Gaskets
To increase longevity, every remanufactured CH465 / SM465 transmission gets upgraded seals and gaskets that are made from a stronger heat resistant material. This upgrade is especially important for severe service (towing, off-roading, performance driving), where heat buildup can be a serious concern.
All of the new hardened bearings in a remanufactured CH465 / SM465 transmission not only perform better under load. They also create less friction for reduced operating temperatures and a longer transmission life.
Fully Inspected & Dyno Tested
Every remanufactured Street Smart Transmission undergoes multiple inspections by Certified inspectors throughout the build process. Once complete, your newly remanufactured CH465 / SM465 transmission is dyno tested to break-in all of the new parts, and to ensure that everything works correctly prior to shipment. And speaking of, shipping is always Free, and you also get a 3-Year/Unlimited Mile Nationwide Warranty that covers parts and labor for repairs that are performed by any licensed repair shop in the country.
Buy Factory Direct and Save!
Save an average of $350 – $1200 than buying through a dealer or repair shop!
Learn more about Shipping, Warranty, Core Returns, and Ordering from Street Smart
About the CH465 / SM465 Transmission
Used from 1968 – 1991, the CH465 / SM465 transmission is a heavy duty 4-speed manual gearbox that was used in a number of General Motors 1/2 – 1-ton trucks. Both 4X2 and 4X4 versions were made, and this durable Chevy transmission saw service in everything from the Chevy Suburban to the GMC 3500 Dually. Although the exact history of the nomenclature isn’t known. It’s widely speculated that the ‘CH’ in the CH465 transmission name stands for Chevrolet, while the ‘SM’ in SM465 transmission is thought to stand for either Saginaw Muncie or Synchro Mesh. Either way, this is an incredibly reliable way to change gears. Especially if you buy a remanufactured CH465 / SM465 transmission.
CH465 / SM465 Transmission Technical Specifications
The CH465 / SM465 transmission is a top loading 4-speed manual gearbox that was engineered to withstand both high output torque and heavy duty use. An example of this was the transmission case on earlier versions that was made completely of cast-iron and had extra ribbing for added strength. Later versions of the CH465 / SM465 transmission saw aluminum integrated into the top half of the transmission case, and a hydraulic clutch release was added after the 1985. Since the CH465 / SM465 was going to be used in hard working applications, dual PTO ports were added (one on each side) to power auxiliary equipment. And in most applications, only 2nd-4th gears were synchronized. 1st/Granny-Low was constant mesh.
Length: 12 inches
Height: 18 inches
Weight: 175 pounds (full cast-iron case)
1988 – 1991 versions of the CH 465/SM465 transmission got a direct drive fourth gear switch to signal the ECU of a cruise/lean mode operation.
How Street Smart Transmission Works
1. Request An Estimate
Select your vehicle above to receive estimate. We will display an out-the-door price for a replacement remanufactured transmission, along with local installation estimate, shipped free to one of our recommended installers or your mechanic.
2. Order Factory Direct & Save
Buy factory direct wholesale and save an average $350 to $1200 vs. buying through shops or dealers. Special Financing available through PayPal Credit. All transmissions come with a 3 year, unlimited mile, parts and labor, nationwide warranty.
3. Free Ship + No Core Charge
*Residential delivery add $200. We do not ship to AK, HI, PR or International.
**Excluding Dodge Diesel 48RE, 65RFE & 68RFE models.
4. Free Core Pickup
Your mechanic installs your new transmission, and places your old transmission (core) into our reusable shipping container. You let us know when your vehicle is done, and we’ll send a truck to pick up the core free, within 24 hours.
Remanufactured CH465 / SM465 vs. Rebuilt or Used
3 Year, Unlimited Miles Nationwide Warranty
Parts & Labor Coverage
Our commitment to delivering excellent service doesn’t end at the closing of the sale! Should you have any questions or concerns about your Street Smart transmission, our Product Support Team is only a phone call away.
So what does a No Hassle Warranty really mean?
• You’re covered for 3 years, unlimited miles.
• Your warranty attaches to your vehicle and transfers to new owners.
• You’re covered anywhere in the continental United States.
• You’re back on the road fast; we send you a replacement transmission. as soon as your warranty diagnosis submitted!
• We pay labor to the shop installing your replacement transmission.
Labor Warranty Defined: Up to $50/hour MItchell book hours for removal and re-installation. Must be initially installed at an auto repair shop for labor warranty to be valid. Auto repair shop is defined as repair shop whose primary business is automotive repair and provides auto repair service to the general public, and the initial install is done on a repair order.
Commercial Application Defined: Vehicles of larger than one ton (F450/F550, 4500/5500 series, motorhomes), transportation for hire (taxis, shuttles, bus, limo) delivery service, business-owned commercial-use vehicles, police/emergency vehicles, tow trucks.
A Day in the Life of a Transmission Video
Learn more about Shipping, Warranty, Core Returns, and Ordering Works
Our Recent Reviews
We let our reviews speak for us.